REDARC DC/DC CHARGER 40 AMP W/SOLAR
REDARC DC/DC CHARGER 40 AMP W/SOLAR
SKU:BCDC1240D
Couldn't load pickup availability
The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.*
*large capacity battery banks may require a few cycles to fully charge.
Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.
If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.
Features
- Separate DC and solar charging inputs
- Maximises the performance and life of your auxiliary battery
- Simultaneous DC and solar charging with Green Power Priority™
- Suits 12V/24V standard and variable voltage/smart alternators
- Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
- Suitable for use on vehicles with conventional alternator charging systems
Mounting Brackets
In addition to the use of quality fuse kits, REDARC offer a range of vehicle-specific mounting brackets for our BCDC DC-DC Charger range. The 304 stainless steel bracket allows installation into the front of the vehicle for cooler airflow, ensuring optimal performance. They have been designed to fit existing mounting points in the vehicle.
SPECIFICATIONS
| Battery Chemistry | Standard Lead Acid, Calcium content, Gel, AGM or LiFePO4 type only |
|---|---|
| Continuous Rating | 40A |
| Power Type - AC DC | DC TO DC |
| Nominal Output Power | 600W |
| Input Fuse Rating | 60A (Not supplied) REDARC FK60 recommended |
| Solar Switch On Voltage | 9V |
| Suitable For 12V Systems | Yes |
| Suitable For 24V Systems | Yes |
| Solar Input Voltage | 9 - 32V |
| MPPT Solar Regulator | Yes |
| Cabin/ Canopy Install | Yes |
| No Load Current | <100mA |
| Trailer Install | Yes |
| Engine Bay Install | Yes |
| Max. Charging Voltage | 15.3V |
| Output Fuse Rating | 60A (Not supplied) REDARC FK60 recommended |
| Operating Temperature | -20°C to 80°C |
| Output Voltage | 12V DC |
| Max. Rated Output Current | 40A |
| Input Voltage | 9 - 32V |
| Standby Current | <8mA |
| Connector Type | Bare wire |
| Weight | 1 kg |
| width | 120 mm |
| height | 37 mm |
| depth | length | 165 mm |
Share
