RVSS Tilt Slide Combo 2
It's a complete fridge slide and vented barrier all in one product!
Exclusive to RV Storage Solutions, the NEW Tilt Slide Combo is the fridge access system everyone has been looking for.
Featuring full aluminium construction this gas strut assisted slide gently and safely tilts your fridge to an angle that makes accessing the contents easy. When completely tilted, the mechanism locks into place. It cannot descend on its own, making it safe for all ages to use. With three locking mechanism positions the tilt angle can be set to suit your vehicle, be it a wagon, a ute or a tray back 4WD.
Raising the fridge is effortless also. The fridge weight is counter balanced by the gas struts. Simply flick the locking lever and begin lifting the slide. It will float upwards, then slide back. With interchangeable gas strut dynamics to match your load, life just gets easier.
The built in Cargo Shelf allows cargo to be stored on both sides and on top of the fridge while the vent holes punched in the side panels allow for plenty of ventilation for the fridge motor. No more hassles with gear falling behind your fridge when the slide it extended.
This Combo is compact, light and great value. One purchase does it all!
Best of all, they are made in Australia
• All aluminium construction
• 250kg rated slide runners
• Gas strut assisted
• Tough ripple finish powder coating
Tilt Slide Combo – 2
• Suits Engel 60, Waeco 80 and similar size fridges. Easily installed on any flat surface. Slide ships with all mounting hardware. Maximum Drop: 165, 220, 273mm (select 1 of 3 positions to suit your application)
NOTE:The Tilt Slide Combo will not suit all applications. Please check your available height and depth carefully when planning which TS Combo will fit. Attention to rear door and cargo barrier clearance (if fitted) is essential for wagons. Utes must check for Canopy opening clearance.
- External: O/A: L890 x W618 x H610mm
- Internal: L804 x W505mm (tray size)
- Tray to Shelf: H520mm (fridge height space)
- Runner Rating: 250kg
- Mounting Surface to Slide Tray: H30mm approx
- Weight: 29kg (incl. Slide & Cargo Shelf)
NOTE: Check your fridge size for fit and clearance. WAGONS: Check for clearance of rear door opening and when drawer system has Half Cargo Barrier fitted. The Tilt Slide Combo must be fitted on top of a drawer system to be able to tilt. It cannot be fitted directly the floor of a wagon or ute tub. Tray back utes need to check for lip clearance to allow for tilt.
*Tilt Slide Combo will require some assembly.
**Tilt Slide Combo's do not come with cable buddy, pictures are for reference only. Can use Clearview Cable Saver p/n CSV-01 (refer below)
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other Shop 4x4 and Outdoor users shop smarter by writing reviews for products you have purchased.