CEL-FI GO TELSTRA 4wd / Trucker Pack
Stay Connected Everywhere
SKU code: RPR-CF-00225
Cel-Fi GO Repeater has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network.
The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your car, 4WD, or truck. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.
"CEL-FI GO IS 30 TIMES MORE POWERFUL THAN A PASSIVE PHONE CRADLES"
FEATURES:
- Designed for vehicles and moving transport applications
- 100dB of system gain (latest software update required using WAVE App)
- Includes external and internal antennas
- Locked to Telstra’s Mobile Network
- Carrier approved
- Band Selection Button
- Black Fibreglass Radome
- Heavy Duty Spring Base
- Ground Independent Design
- Pre-terminated SMA Connector
- Covers 700, 850, 900 & 1800-2100MHz Cellular Bands
- 2.5- 7 dBi Gain
- Length: 1200mm
PACK INCLUDES:
- Cel-Fi GO Mobile Model
- Pulse Magentic Low Shadow Base Antenna with 3.5m cable
- Indoor Panel Antenna with 3m cable
- 12v Cigarette Lighter DC 5m Lead
- GME Multi-Band Cellular Antenna Whip (AW4705BCEL)
- GME Heavy Duty Spring Base & Lead Assembly - SMA Connector (AS004BSCEL)
SUPPORTED NETWORKS - Telstra, Aldi Mobile, Boost Mobile, Woolworths Mobile
IMPORTANT NOTE - Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
WAVE APP REGISTRATION - Once you receive your Cel-Fi it will need to be registered and activated using the Cel-Fi Wave App, available on iPhone, Android, PC and Mac.
In order to do this you will need internet access on your phone or computer.
CEL-FI SETUP
INSTALLATION
Cel-Fi GO is a state of the art, very complex “Smart Repeater” and is approved by Telstra if installed correctly.
It is guaranteed to provide massive signal enhancement in poor reception areas, however incorrect installation may significantly reduce performance.
Installation of a Cel-Fi GO is best done by a qualified installer. Only qualified Powertec Telecommunication Resellers who have undertaken product training on the required precautions should perform installation of the Cel-Fi GO.
Vehicular Cel-Fi GO Packs in particular require you to take into account the vehicle’s safety mechanisms such as airbags, ABS, Traction Control, Stability Control and the auto electrics. Incorrect installation may result in water leaks, electrical failure, battery damage, fusing of internal wiring and cables or risk of FIRE. Misuse of this equipment could result in injury and equipment damage. In no event will Powertec Telecommunications P/L be responsible or liable for either indirect or consequential damage or injury that may result from the installation or use of this equipment.
SPECIFICATIONS:
FREQUENCY UMTS/3G 850 – Band 5 |
DATA - UMTS / HSPA / HSPA+/ LTE (FDD) |
GAIN - Up to 100 dB system gain |
BAND SELECTION Button for band selection: |
BOOSTING THRESHOLD - Will only boost between these signal levels: 3G: -80dBm and -104dBm |
UNIT DIMENSIONS H: 28mm |
ENVIRONMENT Operating Temperature: 0° to 65°C |
POWER 12 VDC via external supply (2 included) |
INTERFACES External Antenna Ports: Donor and Service SMA Female |
WARRANTY - 24 Months |
CERTIFICATIONS CE Mark |
SKU | RPR-CF-00225 |
Brand | Nextivity |
Shipping Weight | 4.5000kg |
Shipping Width | 0.150m |
Shipping Height | 0.150m |
Shipping Length | 1.300m |
Shipping Cubic | 0.029250000m3 |
Unit Of Measure | ea |